RADIATOR SUPPORT ASSEMBLY REPLACEMENT

K138015

  1. REMOVAL

    Symbol Meaning
    K108818

    Remove Weld Points
    K137581

    1. Perform the replacement with the A attached to the vehicle.

      Tip:

      If the A is damaged, replace the A.

      K137582C02

      *A

      LH Side

      -

      -
      K137583C02

      *A

      RH Side

      -

      -

  2. INSTALLATION

    Symbol Meaning
    K108823

    Plug Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      K137585C02

      *A

      LH Side

      -

      -

      *1

      RADIATOR SUPPORT UPPER

      -

      -
      V100146

      N*m (kgf*cm, ft.*lbf) : Specified torque

      -

      -
      K137586C01

      *A

      RH Side

      -

      -

      *1

      RADIATOR SUPPORT UPPER

      -

      -
      V100146

      N*m (kgf*cm, ft.*lbf) : Specified torque

      -

      -
      K137584C01

      *1

      RADIATOR SUPPORT SUB-ASSEMBLY UPPER

      *2

      RADIATOR SUPPORT SUB-ASSEMBLY LOWER

      *3

      RADIATOR SUPPORT SUB-ASSEMBLY

      -

      -
      V100146

      N*m (kgf*cm, ft.*lbf) : Specified torque

      -

      -

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    4. Measure the dimensions before installing the headlights.

      K137957

      Reference Value

      Area

      Measurement

      Area

      Measurement

      A

      1482 mm (58.35 in.)

      B

      744 mm (29.29 in.)

      C

      770 mm (30.31 in.)

      -

      -