TELEMATICS TRANSCEIVER INSTALLATION

PROCEDURE

1. INSTALL ANTENNA DIVIDER

   

   *1	Guide
   	Bolt
   	Connector

   1. Install the antenna divider with the bolt.

      7.0 N*m

      71 kgf*cm

      62 in.*lbf

   2. Connect the connector.

2. INSTALL TELEMATICS TRANSCEIVER

   1. 

      *1	Guide
      	Bolt
      	Connector

      Connect the connectors.

   2. Attach the 2 guides to temporarily install the telematics transceiver.

   3. Install the telematics transceiver with the 3 bolts.

      Tip:

      Tighten the bolts in the order shown in the illustration.

      7.0 N*m

      71 kgf*cm

      62 in.*lbf

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

   Click here

4. INSTALL REAR SEAT ASSEMBLY

   Click here

5. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

   Click here

6. INSTALL REAR DECK TRIM COVER (for Full Size Spare Tire)

   Click here

7. INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

   Click here

   Tip:

   Use the same procedure described for the rear No. 3 floor board side.

8. INSTALL REAR NO. 2 FLOOR BOARD

   Click here

9. INSTALL DECK FLOOR BOX LH

   Click here

10. INSTALL DECK BOARD ASSEMBLY

    Click here

11. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

12. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here

13. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

14. INSTALL REAR DOOR SCUFF PLATE RH

    Click here