SEAT BELT WARNING SYSTEM(w/ Occupant Classification System) CUSTOMIZE PARAMETERS

  1. CUSTOMIZING FUNCTION WITH GTS (REFERENCE)

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Utility / Customize Setting / Warning.

    5. Select the setting by referring to the table below.

      Warning

      Tester Display

      Description

      Default

      Setting

      ECU

      Driver Side Seatbelt Warning Buzzer

      If the driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, the system sounds the seat belt warning buzzer.

      ON

      0:OFF,1:ON

      Combination meter assembly

      Front Passenger Side Seatbelt Warning Buzzer

      If the front passenger side seat belt is unfastened with the front passenger seat occupied, and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, the system sounds the seat belt warning buzzer.

      ON

      0:OFF,1:ON

      Combination meter assembly