FRONT SEAT CUSHION HEATER INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH

    B247956C02

    *1

    Tack Pin

    *2

    Name Stamp

    1. Set the seat cushion heater in place with the name stamp side facing the seat cushion cover.

    2. Install the seat cushion heater with new tack pins.

    3. B247951

      Connect the wire harness to the seat cushion cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

    Click here

  3. INSTALL SEAT CUSHION COVER WITH PAD

    1. Install the seat cushion cover with pad to the seat cushion spring.

    2. for Front Passenger Side:

      Attach the claw to connect the occupant detection sensor connector to the seat cushion spring.

    3. Connect the seat heater connector and attach the 3 wire harness clamps.

    4. Attach the hooks.

    5. Connect the airbag wire harness.

    6. Attach the fastening tape to close the cover.

    7. Connect the seat heater connector and attach the wire harness clamp.

  4. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  6. INSTALL LUMBAR SWITCH ASSEMBLY

    Click here

  7. INSTALL FRONT POWER SEAT SWITCH LH

    Click here

  8. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  9. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Click here

  10. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  11. INSTALL FRONT SEAT ASSEMBLY

    1. Install the front seat assembly (Click here).