PROCEDURE
REMOVE NO. 1 METER HOOD CLUSTER
Protective Tape |
Apply protective tape to the area shown in the illustration.
Place Hand Here | |
Remove in this Direction |
Disengage the 3 clips in the order shown in the illustration.
Place Hand Here | |
Remove in this Direction |
Disengage the 4 clips and 3 guides in the order shown in the illustration.
Disconnect the connector to remove the No. 1 meter hood cluster.
REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
Place Hand Here | |
Remove in this Direction |
Disengage the 5 clips in the order shown in the illustration.
Place Hand Here | |
Remove in this Direction |
Disengage the 6 clips in the order shown in the illustration to remove the No. 2 instrument panel garnish sub-assembly.
REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH
Remove in this Direction |
Disengage the clip, claw and 2 guides to remove the instrument panel finish plate garnish as shown in the illustration.
REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Place Hand Here | |
Remove in this Direction |
Disengage the 2 clips as shown in the illustration.
Place Hand Here | |
Remove in this Direction |
Disengage the 5 clips as shown in the illustration.
Disengage the clamp.
Disconnect each connector to remove the lower center instrument panel finish panel.
REMOVE SHIFT LOCK RELEASE BUTTON COVER
for UA80E:
for UB80E:
for U760E:
for U761E:
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
for UA80E:
for UB80E:
for U760E:
for U761E:
REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Move the shift lever to N.
Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.
Place Hand Here | Remove in this Direction |
Disengage the 5 claws and 4 clips as shown in the illustration.
Place Hand Here | Remove in this Direction |
Disengage the clamp.
Disconnect each connector to remove the rear upper console panel sub-assembly.
REMOVE SHIFT POSITION INDICATOR
for UA80E:
for UB80E:
for U760E:
for U761E:
REMOVE FRONT CONSOLE BOX INSERT SUB-ASSEMBLY
Remove the 5 screws and front console box insert sub-assembly.
REMOVE INSTRUMENT PANEL CUP HOLDER
Remove the 3 screws.
Disengage the 2 claws to remove the instrument panel cup holder.
REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
Place Hand Here | |
Remove in this Direction |
Disengage the 4 clips as shown in the illustration.
Place Hand Here | |
Remove in this Direction |
Disengage the 6 claws to remove the console rear end panel sub-assembly as shown in the illustration.
w/ Power Outlet Socket:
Disconnect the connector.
REMOVE CONSOLE BOX CARPET
Remove in this Direction |
Remove the console box carpet as shown in the illustration.
REMOVE CONSOLE BOX ASSEMBLY
Remove the 4 bolts, 2 screws and console box assembly.