DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on the GTS, read the Data List.
Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
---|---|---|---|---|
ACC SW | Engine switch | ON or OFF | ON: Engine switch on (ACC) OFF: Engine switch off |
"ON" is also displayed for this item when the engine switch is on (IG). |
IG SW | Engine switch | ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off |
"OFF" is also displayed for this item when the engine switch is on (ACC). |
RR Door Courtesy SW | Rear door courtesy light switch RH | ON or OFF | ON: Rear door RH open OFF: Rear door RH closed |
- |
RL Door Courtesy SW | Rear door courtesy light switch LH | ON or OFF | ON: Rear door LH open OFF: Rear door LH closed |
- |
Trunk Lock Position | Luggage compartment door unlock detection switch signal | ON or OFF | ON: Luggage compartment door unlocked OFF: Luggage compartment door locked |
- |
FR Door Lock Pos | Front door RH unlock detection switch | LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
FR Door Courtesy SW | Front door Courtesy light switch RH | ON or OFF | ON: Front door RH open OFF: Front door RH closed |
- |
FL Door Lock Pos | Front door LH unlock detection switch | LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
FL Door Courtesy SW | Front door Courtesy light switch LH | ON or OFF | ON: Front door LH open OFF: Front door LH closed |
- |
Hood Courtesy SW | Engine hood courtesy switch | ON or OFF | ON: Engine hood open OFF: Engine hood closed |
- |
RR-Door Lock Pos SW | Rear door RH unlock detection switch signal | ON or OFF | ON: Rear door RH unlocked OFF: Rear door RH locked |
- |
RL-Door Lock Pos SW | Rear door LH unlock detection switch signal | ON or OFF | ON: Rear door LH unlocked OFF: Rear door LH locked |
- |
Intrusion Sens OFF SW | Intrusion sensor cancel switch*5 | ON or OFF | ON: Intrusion sensor cancel switch on OFF: Intrusion sensor cancel switch off |
- |
Glass Break Sensor Detection | Glass breakage sensor detection*6 | ON or OFF | ON: Glass breakage sensor detected OFF: Glass breakage sensor not detected |
Not applicable |
Intrusion Sensor | Status of the intrusion sensor (theft warning ultrasonic sensor) detection*5 | ON or OFF | ON: Intrusion sensor (theft warning ultrasonic sensor) detected OFF: Intrusion sensor (theft warning ultrasonic sensor) not detected |
- |
Tilt Sensor | Status of the yawrate sensor (theft warning tilt sensor) detection*7 | ON or OFF | ON: Yawrate sensor (theft warning tilt sensor) detected OFF: Yawrate sensor (theft warning tilt sensor) not detected |
- |
Intrusion Sen Conn | Intrusion sensor (theft warning ultrasonic sensor) connecting*5 | ON or OFF | ON: Intrusion sensor (theft warning ultrasonic sensor) connected OFF: Intrusion sensor (theft warning ultrasonic sensor) not connected |
- |
Tilt Sensor Connect | Yawrate sensor (theft warning tilt sensor) connecting*7 | ON or OFF | ON: Yawrate sensor (theft warning tilt sensor) connected OFF: Yawrate sensor (theft warning tilt sensor) not connected |
- |
Intrusion Sensor Sound Detect | Sound detection status of the intrusion sensor (theft warning ultrasonic sensor)*1*5 | ON or OFF | ON: Sound detected OFF: Sound not detected |
- |
Panic Function | This function operates the theft deterrent system when the panic switch is pressed and held for 0.8 seconds*2 | ON or OFF | Customization status displayed | - |
Window Open Warning | This function is used to enable or disable the window open warning | ON or OFF | Customization status displayed | - |
Slide Roof Open Warning | This function is used to enable or disable the sliding roof open warning | ON or OFF | Customization status displayed | - |
Warning by Horn | This function is used to enable or disable the warning by horn.*3 | ON or OFF | Customization status displayed | - |
Intrusion Win Opened | This function is used to enable or disable the window open warning*5 | ON or OFF | Customization status displayed | - |
Security control with mechanism key | This function makes it possible to cancel the security alarm with the mechanical key*4 | ON or OFF | Customization status displayed | - |
Intrusion Sensor Sound Detection Function | Setting of the customized item "Intrusion Sensor Sound Detection Function"*1*5 | ON or OFF | Customization status displayed | - |
Intrusion Sensor Sensitivity Level | Setting of the customized item "Intrusion Sensor Sensitivity Level"*1*5 | Low or Normal | Customization status displayed | - |
*1: w/o Door Ajar Warning Buzzer Function
*2: w/ Panic Switch
*3: for vehicles displaying the item "Warning by Horn" on the GTS
*4: for vehicles displaying the item "Security control with mechanism key" on the GTS
*5: w/ Intrusion Sensor Cancel Switch
*6: Although the item is displayed on the GTS, it is not applicable to this vehicle.
*7: w/ Tilt Sensor
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.
According to the display on the GTS, perform the Active Test.
Tester Display | Measurement Item | Control Range | Diagnostic Note |
---|---|---|---|
Security Horn2 | Theft warning siren assembly*1 | ON or OFF | - |
Vehicle Horn | Vehicle horn | ON or OFF | - |
Security Horn | Security horn assembly*2 | ON or OFF | - |
Power For Intrusion Sensor | Intrusion sensor (theft warning ultrasonic sensor) power supply*3 | ON or OFF | - |
Power For Tilt Sensor | Yawrate sensor (theft warning tilt sensor) power supply*4 | ON or OFF | - |
*1: w/o Security Horn
*2: w/ Security Horn
*3: w/ Intrusion Sensor Cancel Switch
*4: w/ Tilt Sensor
Tester Display | Measurement Item | Control Range | Diagnostic Note |
---|---|---|---|
Immobiliser Indicator | Security indicator | ON or OFF | - |