NAVIGATION SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    After the engine switch is turned off, the navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the engine switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    Waiting Time before Disconnecting Cable from Negative (-) battery Terminal
    System Name See Procedure
    Vehicle enrolled in telematics system (for G-BOOK) 6 minutes
    Vehicle not enrolled in telematics system (for G-BOOK) 1 minute
  2. Note


    • When replacing the radio receiver assembly or navigation ECU, always replace it with a new one.

      If a radio receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:


      • A communication malfunction DTC may be stored.

      • The radio receiver assembly or navigation ECU may not operate normally.

    • When performing the following work, the navigation system may restart when turning the engine switch on (ACC) (due to radio receiver assembly and navigation ECU certification).


      • Repair or replace the negative (-) battery terminal due to it being disconnected or depleted.

      • The radio receiver assembly or navigation ECU replacement or removal and installation.

    • When replacing the radio receiver assembly or navigation ECU, always replace it with a new one.

      If a radio receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:

    • After replacing the navigation ECU, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display, update the software of the radio receiver assembly.

    PRECAUTION FOR NAVIGATION SYSTEM


    1. If replacing the DCM (telematics transceiver), refer to Initialization of Repair Instruction. (w/ Telematics Transceiver [for ERA-GLONASS])

      Click here

    2. When replacing the DCM (telematics transceiver), make sure to replace it with a new one. (w/ Telematics Transceiver [for G-BOOK])

  3. PRECAUTIONS FOR G-BOOK (w/ Telematics Transceiver [for G-BOOK])


    1. The navigation ECU functions as the G-BOOK device and holds the G-BOOK ID.

      Note

      When replacing the navigation ECU or DCM (telematics transceiver), perform Vehicle Contract Setting.

      Click here

    2. Necessary data for the telematics system is stored in the radio receiver assembly and navigation ECU.

      Note

      Download necessary data after replacing the radio receiver assembly or navigation ECU.

      Click here