PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
Note
After the power switch is turned off, the radio receiver assembly records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal.
When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the terminal is reconnected.
System Name | See Procedure |
---|---|
Lane Departure Alert System (w/ Steering Control) | |
Parking Assist Monitor System (w/o Parallel Parking Assist Function) | |
Pre-collision System |
PRECAUTION FOR AUDIO AND VISUAL SYSTEM
Note
When replacing the radio receiver assembly, always replace it with a new one. If a radio receiver assembly which was installed to another vehicle is used, the following may occur:
A communication malfunction DTC may be stored.
The radio receiver assembly may not operate normally.