PROCEDURE
INSPECT REAR SEAT OUTER BELT ASSEMBLY LH
CAUTION:
The rear seat outer belt assembly LH contains an internal pretensioner, so when performing component inspection, make sure not to accidentally connect the battery to the pretensioner connector terminal.
If the battery is connected to the pretensioner connector terminal, the pretensioner will activate, which could result in serious injury.
Check the seat belt tension reducer operation.
*a | Component without harness connected (Rear Seat Outer Belt Assembly LH) |
Check the operating sound.
OK | ||||
---|---|---|---|---|
|
Pull out the seat belt again, disconnect the negative (-) lead of the battery and allow the seat belt to retract. Listen to the operating sound again and check that the operating sound volume has increased.
If the result is not as specified, replace the rear seat outer belt assembly LH.
*a | Unlock |
*b | Lock |
*c | 45° |
Before installing the rear seat outer belt assembly LH, check the ELR function.
Note
Do not disassemble the retractor.
When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
If the result is not as specified, replace the rear seat outer belt assembly LH.
INSPECT REAR SEAT OUTER BELT ASSEMBLY RH
CAUTION:
The rear seat outer belt assembly RH contains an internal pretensioner, so when performing component inspection, make sure not to accidentally connect the battery to the pretensioner connector terminal.
If the battery is connected to the pretensioner connector terminal, the pretensioner will activate, which could result in serious injury.
Check the seat belt tension reducer operation.
*a | Component without harness connected (Rear Seat Outer Belt Assembly RH) |
Check the operating sound.
OK | ||||
---|---|---|---|---|
|
Pull out the seat belt again, disconnect the negative (-) lead of the battery and allow the seat belt to retract. Listen to the operating sound again and check that the operating sound volume has increased.
If the result is not as specified, replace the rear seat outer belt assembly RH.
*a | Unlock |
*b | Lock |
*c | 45° |
Before installing the rear seat outer belt assembly RH, check the ELR function.
Note
Do not disassemble the retractor.
When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
If the result is not as specified, replace the rear seat outer belt assembly RH.