ILLUMINATED ENTRY SYSTEM
The illuminated entry system has the following control functions:
Control | Outline | Lights that Operate |
---|---|---|
Actuation Area-linked*1 | When a registered key is brought within any vehicle exterior detection area around the doors, the lights that operate turn on. |
|
Door Lock/Unlock-linked | When any door is unlocked, the lights that operate turn on. |
|
When all doors are locked, the lights that operate turn off. | ||
Door Open/Close-linked | When any door is opened, the lights that operate turn on. |
|
When all doors are closed, the lights that operate turn off. | ||
Engine Switch-linked*1 | When the engine switch is turned from on (ACC) or on (IG) to off, the lights that operate turn on. |
|
When the engine switch is turned from off to on (ACC) or on (IG), the lights that operate turn off. |
|
|
Ignition Switch-linked*2 | When the ignition switch is turned from ACC or ON to off, the lights that operate turn on. |
|
When the ignition switch is turned from off to ACC or ON, the lights that operate turn off. | ||
Shift Position-linked | When the shift lever is moved from P to any other position, the lights that operate dim. |
|
Delay | When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
|
|
When approximately 40 seconds elapse after any of the following conditions is met, the lights that operate turn off:
|
Engine Switch Illumination*1 |
*1: w/ Smart Entry and Start System
*2: w/o Smart Entry and Start System
*3: w/ Room Light (for LED Type)
*4: w/ Room Light (for Bulb Type)
*5: w/ Footwell Light
*6: w/ Front Door Inside Handle Illumination Light
*7: w/ Rear Door Inside Handle Illumination Light
*8: w/ Instrument Panel Ambient Illumination Light
BATTERY SAVING CONTROL SYSTEM
The battery saving function has the following control functions:
Control | Condition | Lights that Operate |
---|---|---|
Basic operation | When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off. Tech Tips Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.
|
|
Interior light auto cut operation | When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off. Tech Tips Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.
|
|
*1: w/ Smart Entry and Start System
*2: w/o Smart Entry and Start System
*3: w/ Room Light (for LED Type)
*4: w/ Room Light (for Bulb Type)
*5: w/ Footwell Light
*6: w/ Front Door Inside Handle Illumination Light
*7: w/ Rear Door Inside Handle Illumination Light
*8: w/ Instrument Panel Ambient Illumination Light
*9: w/ Courtesy Light