DTC Code | DTC Name |
---|---|
HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
Tech Tips
*: Use the GTS.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
Result | ||
---|---|---|
|
NEXT |
CUSTOMER PROBLEM ANALYSIS
Interview the customer and confirm the problem.
Result | ||
---|---|---|
|
NEXT |
INSPECT AUXILIARY BATTERY
Standard voltage |
---|
11 to 14 V (Power switch off) |
If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.
Result | ||
---|---|---|
|
NEXT |
CHECK DTC AND FREEZE FRAME DATA*
Check and record DTCs and Freeze Frame Data.
for DTC Check / Clear: Click here
for Freeze Frame Data: Click here
Record the DTC and Freeze Frame Data.
Clear the DTCs and Freeze Frame Data.
Reconfirm the DTCs.
Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data.
Try to reproduce the problem symptoms based on the recorded DTCs and Freeze Frame Data, and then check if the DTCs are output again.
Result | ||||||||
---|---|---|---|---|---|---|---|---|
|
Tech Tips
Refer to Diagnostic Trouble Code Chart when any DTCs are output
When DTCs indicating a CAN communication system malfunction are output, first troubleshoot and repair the CAN communication system.
B |
GO TO DIAGNOSTIC TROUBLE CODE CHART Click here |
C |
USE SIMULATION METHOD TO CHECK Click here |
A |
PROBLEM SYMPTOMS TABLE
Proceed to Problem Symptoms Table.
Result | ||||||
---|---|---|---|---|---|---|
|
B |
GO TO STEP 7 Click here |
A |
OVERALL ANALYSIS AND TROUBLESHOOTING*
Refer to Terminals of ECU.
Refer to Data List / Active Test.
Result | ||
---|---|---|
|
NEXT |
REPAIR OR REPLACEMENT
Result | ||
---|---|---|
|
NEXT |
CONFIRMATION TEST
Result | ||
---|---|---|
|
NEXT |
END |