PROCEDURE
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
REMOVE BATTERY
REMOVE FUEL FILTER ASSEMBLY
DISCONNECT ENGINE WIRE
REMOVE FUEL FILTER SUPPORT
REMOVE AIR CLEANER BRACKET
REMOVE NO. 1 AIR TUBE
*a | Hose Clamp |
Disconnect the wire harness clamp.
Remove the 4 bolts.
Loosen the 2 hose clamps and remove the No. 1 air tube.
DISCONNECT WIRE HARNESS
Disconnect the 5 wire harness clamps.
Disconnect the 6 connectors.
Disconnect the select stroke sensor connector.
Disconnect the 3 wire harness clamps.
REMOVE SHIFT AND SELECT ACTUATOR ASSEMBLY
Remove the bolt and wire harness clamp bracket from the shift and select actuator.
Remove the bolt and wire harness clamp bracket from the shift and select actuator.
Remove the 6 bolts, wire harness clamp bracket and shift and select actuator from the transaxle case.
Remove the 2 ring pins from the shift and select actuator.
Remove the bolt and breather protector from the shift and select actuator.
Remove the breather plug cap from the shift and select actuator.