Note
If the main body ECU (multiplex network body ECU) is replaced, refer to Service Bulletin.
Tech Tips
Troubleshooting of the theft deterrent system is based on the premise that the power door lock control system and the wireless door lock control system are operating normally. Accordingly, before troubleshooting the theft deterrent system, first make certain that the power door lock control system and the wireless door lock control system are operating normally.
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Symptom | Suspected Area | Link |
---|---|---|
Theft deterrent system cannot be set | Immobiliser system "security indicator light does not blink" | |
Front door courtesy switch circuit | ||
Rear door courtesy switch circuit | ||
Luggage compartment door courtesy switch circuit | ||
Front door lock with motor assembly | ||
Rear door lock with motor assembly | ||
Luggage compartment door lock assembly | ||
Engine hood courtesy switch circuit | ||
Security indicator light does not blink when theft deterrent system is set | Immobiliser system "security indicator light does not blink" | |
Alarm sounding state cannot be canceled when engine switch is turned on (IG) | Entry and start system (for start function)*1 | |
Push-button start*2 | ||
Certification ECU (Smart key ECU assembly) | - | |
If the symptom(s) still occur after the above areas are inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
Theft deterrent system can be set even when door is open | Front door courtesy switch circuit | |
Rear door courtesy switch circuit | ||
Luggage compartment door courtesy switch circuit | ||
If the symptom(s) still occur after the above areas are inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
Theft deterrent system can be set even when engine hood is open | Engine hood courtesy switch circuit | |
Vehicle horns do not sound while theft deterrent system is in alarm sounding state | Horn circuit | |
Hazard warning lights do not flash while theft deterrent system is in alarm sounding state | Combination meter assembly | - |
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
Security horn does not sound while theft deterrent system is in alarm sounding state*3 | Security horn circuit | |
Theft warning siren does not sound while theft deterrent system is in warning operation*4 | Theft warning siren circuit | |
Hazard warning lights flash even when theft deterrent system is not set | Combination meter assembly | - |
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
The vehicle does not enter the alarm sounding state according to intrusion sensor operation*5 | Intrusion sensor circuit | |
Intrusion sensor cancel switch circuit | ||
If the symptom(s) still occur after the above areas are inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
Intrusion sensor cancel switch does not operate*5*6 | Intrusion sensor cancel switch circuit | |
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
The vehicle does not enter the alarm sounding state according to tilt sensor operation*6 | Tilt sensor circuit | |
Intrusion sensor cancel switch circuit | ||
If the symptom(s) still occur after the above areas are inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) |
*1: w/ Entry Function
*2: w/o Entry Function
*3: w/ Security Horn Assembly
*4: w/o Security Horn Assembly
*5: w/ Intrusion Sensor Cancel Switch
*6: w/ Tilt Sensor