DTC CHECK/CLEAR
Check for DTCs.
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.
Read the DTCs by following the prompts on the GTS screen.
Clear the DTCs.
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.
Operate the GTS to clear the codes.
Tech Tips
Refer to the GTS operator's manual for further details.
END OF DTC CHECK/CLEAR
Turn the ignition switch to ON.
Check that the ABS warning light go off within approximately 3 seconds.