PROCEDURE
INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
Install the No. 3 parking brake cable assembly with the 3 bolts and nut.
*1 | No. 3 Parking Brake Cable Assembly | - | - |
Install the clip.
Install the No. 3 parking brake cable assembly to the backing plate with the 2 bolts.
Connect the No. 3 parking brake cable assembly to the parking brake shoe lever.
INSTALL PARKING BRAKE EQUALIZER SUB-ASSEMBLY
Install the parking brake equalizer sub-assembly with the 2 bolts.
INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY
Install the No. 2 parking brake cable assembly with the 4 bolts.
*1 | No. 2 Parking Brake Cable Assembly | *2 | Parking Brake Equalizer Sub-assembly |
MP grease |
Connect the No. 2 parking brake cable assembly to the parking brake equalizer sub-assembly and apply MP grease to the connecting portion.
Connect the No. 2 parking brake cable assembly to the backing plate with the 2 bolts.
Connect the No. 2 parking brake cable assembly to the parking brake shoe lever.
INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
Install the cable support bracket with the bolt.
Insert the No. 1 parking brake cable assembly from inside the vehicle.
Install the 2 bolts.
Connect the No. 1 parking brake cable assembly to the cable support bracket.
Connect the No. 1 parking brake cable assembly to the parking brake equalizer sub-assembly.
Connect the No. 1 parking brake cable assembly to the No. 3 parking brake cable assembly.
MP grease |
Apply MP grease to the pin.
Install the clip and pin to the No. 3 parking brake cable assembly.
INSTALL FUEL TANK
1GR-FE:
2KD-FTV:
1GD-FTV:
2GD-FTV:
2TR-FE:
5L-E:
INSTALL PROPELLER SHAFT ASSEMBLY
for TSAM Made:
for TMT Made:
INSTALL PARKING BRAKE CABLE HEAT INSULATOR
Install the parking brake cable heat insulator with the 2 bolts.
INSTALL REAR BRAKE DRUM SUB-ASSEMBLY
INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET
Install the No. 2 console box mounting bracket to the intermediate lever protector with the 2 bolts.
INSTALL INTERMEDIATE LEVER PROTECTOR
Install the intermediate lever protector to the body with the 3 bolts.
Install the floor carpet.
INSTALL LUGGAGE COMPARTMENT SIDE COVER LH (for Smart Cab)
INSTALL LUGGAGE COMPARTMENT SIDE COVER RH (for Smart Cab)
INSTALL LOWER QUARTER TRIM PANEL LH
for Single Cab:
for Smart Cab:
for Double Cab:
INSTALL LOWER QUARTER TRIM PANEL RH
for Single Cab:
for Smart Cab:
for Double Cab:
CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
for Smart Cab:
for Double Cab:
CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH
for Smart Cab:
Tech Tips
Use the same procedure described for the LH side.
for Double Cab:
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR DOOR SCUFF PLATE LH (for Double Cab)
INSTALL REAR DOOR SCUFF PLATE RH (for Double Cab)
INSTALL FRONT DOOR SCUFF PLATE LH
for Single Cab:
for Smart Cab:
INSTALL FRONT DOOR SCUFF PLATE RH
for Single Cab:
for Smart Cab:
INSTALL BACK PANEL TRIM (for Smart Cab)
INSTALL REAR SEAT ASSEMBLY (for Double Cab)
for Smart Cab (w/ Rear Seat Assembly):
for Double Cab:
for Seat Cushion 60/40 Split Type:
for Seat Cushion Bench Type:
INSTALL FRONT SEAT ASSEMBLY (for Bench Seat Type)
for Single Cab:
INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
for Single Cab:
INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Smart Entry and Start System)
INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
ADJUST PARKING BRAKE LEVER TRAVEL
INSTALL REAR WHEEL