PROCEDURE
INSPECT STEERING PAD SWITCH ASSEMBLY
Measure the resistance according to the value(s) in the table below.
*A | w/ LKA/LDA System | - | - |
*1 | SEEK+ | *2 | SEEK- |
*3 | VOL+ | *4 | VOL- |
*5 | MODE | *6 | VOICE |
*7 | OFF HOOK | *8 | ON HOOK |
*9 | UP | *10 | DOWN |
*11 | LEFT | *12 | RIGHT |
*13 | ENTER | *14 | TOP |
*15 | BACK | *16 | ACC |
*17 | LKA/LDA | - | - |
*a | Component without harness connected (Steering Pad Switch Assembly) |
- | - |
Standard Resistance | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
*: w/ LKA/LDA System
Tech Tips
If the result is not as specified, replace the steering pad switch assembly.
Check the illumination.
Connect a battery positive (+) lead to terminal z4-5 (IL+2) and a negative (-) lead to terminal z4-9 (ILL-) of the steering pad switch assembly connector.
Check that the switch illumination comes on.
OK |
---|
Steering pad switch illumination comes on. |
Tech Tips
If the result is not as specified, replace the steering pad switch assembly.