CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
PRECAUTION
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY
REMOVE NO. 1 NAVIGATION WIRE
Disconnect each connector and remove the No. 1 navigation wire.
REMOVE NAVIGATION ECU
Disconnect the connector.
Remove the 4 screws.
Remove the navigation ECU as shown in the illustration.
REMOVE TELEPHONE ANTENNA CORD SUB-ASSEMBLY
Disconnect the connector and remove the telephone antenna cord sub-assembly.