PROCEDURE
INSTALL GENERATOR ASSEMBLY
Install the wire harness bracket with the bolt to the generator assembly.
Using an E8 "TORX" socket wrench, temporarily install the generator assembly with the 2 stud bolts.
Tighten the 2 stud bolts.
*1 | Engine Wire Bracket |
Install the bolt B and 2 nuts.
Install the engine wire bracket with the bolt A.
Install the oil cooler tube bracket with the bolt.
Install the oil cooler tube with the bolt.
Connect the generator assembly connector.
Connect the engine wire to the terminal B with the nut.
Install the terminal cap.
Attach the clamp.
Connect the engine wire with the bolt.
Attach the 2 clamps.
INSTALL FRONT STABILIZER BAR BRACKET BOLT
Install the bolt and specer nut to the front frame crossmenber sub-assembly.
INSTALL FAN AND GENERATOR V BELT
INSTALL OIL COOLER ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.