PERSONAL LIGHT REMOVAL

PROCEDURE


  1. REMOVE MAP LIGHT SUB-ASSEMBLY

    Note

    If the map light sub-assembly is removed, make sure to replace the 2 clips with new ones.


    1. B004CG9C01
      B004B1M Pull in this Direction

      Insert moulding remover D between the map light sub-assembly on the driver side and roof headlining assembly.

    2. Pull the moulding remover D downward to detach the clip.

    3. B004CGPC01
      B004B1M Pull in this Direction

      Insert moulding remover D between the map light sub-assembly on the front passenger side and the roof headlining assembly.

    4. Pull the moulding remover D downward to detach the clip.

    5. Pull the map light sub-assembly downward to detach the hook.

    6. Disconnect the 2 connectors.

      B004CBMC01
      B004B1M Remove in this Direction - -
    7. B004BMT

      Remove the clip from the map light sub-assembly.

      Tech Tips

      Use the same procedure to remove the clip on the other side.