PROCEDURE
REMOVE NO. 1 ENGINE COVER
REMOVE NO. 1 IGNITION COIL
Disengage the clamp to separate the wire harness from the wiring harness clamp bracket.
Disconnect the 4 No. 1 ignition coil connectors.
Remove the 4 bolts and 4 No. 1 ignition coils from the cylinder head cover sub-assembly.
Note
If a component has been dropped or subjected to a strong impact, replace the No. 1 ignition coil.
REMOVE SPARK PLUG
Remove the 4 spark plugs from the cylinder head sub-assembly.
Note
If a component has been dropped or subjected to a strong impact, replace the spark plug.
Tech Tips
Arrange the removed parts in the correct order.