CAUTION / NOTICE / HINT
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
REMOVE ROOF HEADLINING ASSEMBLY
Remove the roof headlining Click here.
REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH
Remove the clips.
Using a clip remover, remove the pin.
Remove the clip as shown in the illustration.
Remove the spacers.
Remove the spacer as shown in the illustration.
Disconnect the connector.
When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the 4 bolts and curtain shield airbag.