PROCEDURE
INSPECT STARTER RELAY (ST)
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||
---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the starter relay.
INSPECT ACC RELAY (ACC)
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||
---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the ACC relay.
INSPECT GLOW RELAY
Remove the bolt.
Disconnect the connector and remove the glow relay.
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||
---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the glow relay.
Connect the connector.
Install the glow relay with the bolt.