PROCEDURE
INSPECT STOP LIGHT SWITCH ASSEMBLY
Disconnect the stop light switch connector.
*a | Front view of wire harness connector (to Stop Light Switch Assembly) |
Measure the resistance and voltage on the wire harness side connector according to the value(s) in the table below.
Standard Resistance | ||||||
---|---|---|---|---|---|---|
|
Standard Voltage | ||||||||
---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, repair or replace the wire harness or connector.
Reconnect the stop light switch connector.
*a | Component with harness connected (Stop Light Switch Assembly) |
Measure the voltage according to the value(s) in the table below.
Standard Voltage | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the stop light switch assembly.