LOWER INSTRUMENT PANEL INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. Cut off both ends at the positions shown in the illustration (runner) (when installing new part).

      A0052THE02
      Text in Illustration
      *1 Runner - -
      *a Cut-off Line - -
    2. Attach the 2 guides to install the lower instrument panel sub-assembly.

    3. for Automatic Air Conditioning System:

      Connect the cooler (room temperature sensor) thermistor.

    4. Attach the clamps.

    5. Install the 2 screws.

      A0056YIE02
      Text in Illustration
      *1 Guide *2 Clamp
      *3 Screw - -
    6. Install the 9 screws <C>, 2 bolts <D> and screw <E>.

      A005530E02
      Text in Illustration
      *1 Screw <C> *2 Bolt <D>
      *3 Screw <E> - -
  2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  3. INSTALL ELECTRIC PARKING BRAKE SWITCH ASSEMBLY

    Click here

  4. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  5. INSTALL COWL SIDE TRIM BOARD RH

    Click here

  6. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  7. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

  8. INSTALL NO. 2 HEATER TO REGISTER DUCT


    1. A0052QR

      Attach the guide to install the No. 2 heater to register duct.

  9. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. A0053PAE01
      Text in Illustration
      *1 Clip <B>

      Attach the 3 claws to install the defroster nozzle assembly.

    2. Install the 2 clips <B>.

  10. INSTALL STEREO OPENING COVER WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Audio)


    1. A0058YJ

      Connect the connector.

    2. Attach the 2 clips to install the stereo opening cover with air conditioning control assembly.

    3. Install the 4 screws.

  11. INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Audio, for Radio Receiver Type)

    Click here

  12. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Audio, for Radio and Display Type)

    Click here

  13. INSTALL COIN BOX ASSEMBLY


    1. A005528

      Attach the 2 hinges to install the coin box assembly.

    2. A0052AU

      While pushing in the sides of the coin box as indicated by the arrows in the illustration, close the coin box assembly to engage the 2 stoppers.

  14. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  15. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A00571JE02
      Text in Illustration
      *1 Screw <A>

      Connect the connector.

    2. Attach the guide and claw to install the No. 1 instrument panel under cover sub-assembly.

    3. Install the 2 screws <A>.

  16. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A0056A9

      Connect the connector.

    2. Attach the guide and 3 claws to install the No. 2 instrument panel under cover sub-assembly.

  17. INSTALL NO. 1 SWITCH HOLE BASE


    1. A0052GA

      for LHD:


      1. Connect the connectors.

      2. Attach the 4 clips and 2 claws to install the No. 1 switch hole base.

    2. A00564M

      for RHD:


      1. Connect the connectors.

      2. Attach the 4 clips and 2 claws to install the No. 1 switch hole base.

  18. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

    Click here

  19. INSTALL CONSOLE BOX ASSEMBLY

    Click here

  20. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  22. CHECK SRS WARNING LIGHT

    Click here