PROCEDURE
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE CONSOLE BOX ASSEMBLY (w/ Console Box Lid)
Remove the console box assembly Click here.
REMOVE YAW RATE SENSOR
Disconnect the sensor connector and detach the clamp from the yaw rate sensor bracket.
Remove the 2 bolts and yaw rate sensor bracket.
Remove the 2 bolts and yaw rate sensor.