PROCEDURE
INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)
Apply a light coat of engine oil to the O-ring of the sensor.
Install the sensor with the bolt.
Note
Make sure that the O-ring is not cracked or jammed during installation.
Connect the sensor connector.
INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)
Apply a light coat of engine oil to the O-ring of the sensor.
Install the sensor with the bolt.
Note
Make sure that the O-ring is not cracked or jammed during installation.
Connect the sensor connector.
INSTALL NO. 2 CYLINDER HEAD COVER