PROCEDURE
INSTALL ECM
Install the No. 1 ECM bracket and No. 2 ECM bracket to the ECM with the 4 screws.
Install the ECM with the 2 bolts.
Connect the 2 ECM connectors.
Connect the 2 ECM connectors and lower the 2 levers.
Note
When connecting the connectors, make sure that dirt, water or other foreign matter does not get caught between the connectors and other parts.
Make sure that the 2 levers are securely lowered.
Connect the wire harness clamp.
CONNECT NO. 2 AIR CLEANER INLET
Connect the No. 2 air cleaner inlet to the vehicle body with the bolt.
INSTALL NO. 1 AIR CLEANER INLET
Attach the 2 claws to install the No. 1 air cleaner inlet.
Install the clip.
INSTALL AIR CLEANER CASE SUB-ASSEMBLY
Install the air cleaner case with the 3 bolts.
Attach the wire harness clamp to the air cleaner case.
INSTALL AIR CLEANER CAP SUB-ASSEMBLY
INSTALL NO. 2 CYLINDER HEAD COVER
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL RADIATOR SUPPORT OPENING COVER
RESET MEMORY
When replacing the ECM, perform the Reset Memory procedure (A/T initialization) Click here.