Info Added 2017-10-06
CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
REMOVE INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY
REMOVE INSTRUMENT PANEL CENTER REGISTER ASSEMBLY
REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
Remove the 4 screws.
Remove in this Direction |
Pull the radio and display receiver assembly with bracket toward the rear of the vehicle to disengage the claws and clips as shown in the illustration.
Disconnect each connector and remove the radio and display receiver assembly with bracket.
REMOVE NO. 1 RADIO RECEIVER BRACKET
Remove the 2 screws and No. 1 radio receiver bracket from the radio and display receiver assembly.
REMOVE NO. 2 RADIO RECEIVER BRACKET
Remove the 2 screws and No. 2 radio receiver bracket from the radio and display receiver assembly.