PROCEDURE
PRECAUTION
Note
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.
REMOVE DECK BOARD ASSEMBLY
REMOVE NO. 1 DECK BOARD
REMOVE NO. 2 DECK BOARD
REMOVE REAR DECK FLOOR BOX
REMOVE DECK FLOOR BOX RH
DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE INTEGRATION CONTROL AND PANEL
REMOVE INSTRUMENT PANEL BOX ASSEMBLY
REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
REMOVE NO. 1 NAVIGATION WIRE
Disconnect each connector to remove the No. 1 navigation wire.
REMOVE ANTENNA CORD SUB-ASSEMBLY
Disengage the clamp.
Disconnect the 2 connectors to remove the antenna cord sub-assembly.
REMOVE NO. 1 RADIO RECEIVER BRACKET
REMOVE NO. 2 RADIO RECEIVER BRACKET
REMOVE NAVIGATION ECU