CAUTION / NOTICE / HINT
Note
Do not replace the spiral cable with sensor sub-assembly with the auxiliary battery connected and the power switch on (IG).
Do not rotate the spiral cable with sensor sub-assembly without the steering wheel assembly installed with the auxiliary battery connected and the power switch on (IG).
Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.
PROCEDURE
INSTALL STEERING PAD SWITCH ASSEMBLY
INSTALL CRUISE CONTROL MAIN SWITCH
INSTALL LOWER NO. 2 STEERING WHEEL COVER
ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
INSTALL STEERING WHEEL ASSEMBLY
*a | Matchmark |
Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.
Install the steering wheel assembly set nut.
w/ steering heater:
Connect the steering heater connector.
Connect the 2 connectors to the spiral cable with sensor sub-assembly.
CHECK STEERING WHEEL CENTER POINT
INSTALL HORN BUTTON ASSEMBLY