PROCEDURE
INSTALL REAR NO. 2 DIFFERENTIAL MOUNT CUSHION
*a | Arrow |
*b | Matchmark |
Put matchmarks on the rear suspension member and new rear No. 2 differential mount cushion.
CAUTION:
Install the rear No. 2 differential mount cushion with the arrow marks facing upward and downward.
*1 | Rear Suspension Member |
*2 | Rear No. 2 Differential Mount Cushion |
*3 | SST(09571-01090) |
*4 | SST(09571-01070) |
*5 | SST(09571-01050) |
*6 | SST(09571-01080) |
*7 | SST(09571-01040) |
*8 | SST(09571-01030) |
*9 | SST(09571-01060) |
*a | Hold |
*b | Turn |
*c | Start |
*d | End |
Front side |
Using SST, install the rear No. 2 differential mount cushion.
INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION
*a | Triangle Mark |
*b | Matchmark |
Put matchmarks on the rear suspension member and new rear No. 1 differential mount cushion.
Note
Install the rear No. 1 differential mount cushion with the triangle mark facing upward.
*1 | Rear Suspension Member |
*2 | Rear No. 1 Differential Mount Cushion |
*3 | SST(09571-01150) |
*4 | SST(09571-01130) |
*5 | SST(09571-01190) |
*6 | SST(09571-01120) |
*7 | SST(09571-01170) |
*8 | SST(09571-01140) |
*9 | SST(09571-01160) |
*10 | SST(09571-01180) |
*11 | SST(09922-10010) |
*a | Hold |
*b | Turn |
*c | Start |
*d | End |
Front side |
Using SST, install the rear No. 1 differential mount cushion.
Note
Install the rear No. 1 differential mount cushion while checking that SST and the rear No. 1 differential mount cushion are not at an angle.
If the rear No. 1 differential mount cushion is pushed in at an angle, the installation becomes difficult. Be sure to set SST on the rear No. 1 differential mount cushion with no clearance.
INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
INSTALL REAR STABILIZER BAR
INSTALL TAIL EXHAUST PIPE ASSEMBLY
INSTALL DIFFERENTIAL CARRIER ASSEMBLY