PROCEDURE
INSTALL FUEL PUMP
*1 | O-ring |
*2 | Spacer |
Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.
Connect the fuel pump harness connector.
Engage the 5 claws of the fuel pump.
Note
Make sure that the O-ring is not cut or pinched during the installation.
Engage the claws securely.
Do not remove the suction filter.
Engage the 2 claws of the No. 1 fuel suction support.
Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.
Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.
Note
Do not apply excessive force to the fuel tube or the suction support.
Connect the connector of the fuel pump harness.
INSTALL FUEL SENDER GAUGE ASSEMBLY