CHECK DTC
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
Check for DTCs, and then write them down.
Check for DTCs Click here.
Note
The multi-media module receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.
System | Proceed to |
---|---|
Audio and visual system | |
Telematics system (w/ Telematics Transceiver for G-BOOK) | |
Telematics system (w/ Telematics Transceiver except G-BOOK) |
CLEAR DTC
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
Clear the DTCs.