PROCEDURE
REMOVE NO. 1 ROOM LIGHT ASSEMBLY
*a | Protective Tape |
Front |
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the No. 1 room light lens.
*a | Protective Tape |
Front | |
Remove in this Direction |
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws as shown in the illustration to separate the No. 1 room light housing.
*1 | Room Light Switch Base |
Disengage the clamp.
Disengage the 4 claws to disconnect the room light switch base from the No. 1 room light housing.
REMOVE NO. 1 ROOM LIGHT BULB
Remove the No. 1 room light bulb from the room light switch base.