PROCEDURE
REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY
REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
REMOVE AUTOMATIC LIGHT CONTROL SENSOR
REMOVE NO. 1 DEFROSTER NOZZLE GARNISH
REMOVE DEFROSTER NOZZLE ASSEMBLY
REMOVE NO. 3 HEATER TO REGISTER DUCT
REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)
w/o Navigation System:
Disengage the 6 clamps and remove the antenna cord sub-assembly.
w/ Navigation System:
Disengage the 7 clamps and remove the antenna cord sub-assembly.
REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)
Disengage the 7 clamps and remove the antenna cord sub-assembly.
REMOVE ROOF HEADLINING ASSEMBLY
REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY
Remove the adhesive tape from the roof headlining assembly.
*A | for Standard | *B | for Glass Roof |
Adhesive Tape | - | - | |
Front | - | - |
Disengage the 2 guides and remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.
REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY (w/o Digital Audio Broadcasting Antenna)
for Standard:
Disconnect the connector.
Disengage the 4 clamps to remove the No. 3 antenna cord sub-assembly.
for Glass Roof:
Disconnect the connector.
Disengage the 5 clamps to remove the No. 3 antenna cord sub-assembly.
REMOVE NO. 4 ANTENNA CORD SUB-ASSEMBLY (for RH Side with Digital Audio Broadcasting Antenna)
w/o Roof Antenna:
Disconnect the connector.
Disengage the 5 clamps to remove the No. 4 antenna cord sub-assembly.
w/ Roof Antenna:
Disconnect the 2 connectors.
Disengage the 5 clamps to remove the No. 4 antenna cord sub-assembly.
REMOVE NO. 4 ANTENNA CORD SUB-ASSEMBLY (for LH Side with Digital Audio Broadcasting Antenna)
for Standard:
Disconnect the 2 connectors.
Remove the bolt.
Disengage the 4 clamps to remove the No. 4 antenna cord sub-assembly.
for Glass Roof:
Disconnect the 2 connectors.
Remove the bolt.
Disengage the 5 clamps to remove the No. 4 antenna cord sub-assembly.