DTC Code | DTC Name |
---|---|
B2343 | Position Initialization Incomplete |
DESCRIPTION
This DTC is output when the sliding roof drive gear sub-assembly (sliding roof ECU) has not been initialized.
DTC Code | DTC Detection Condition | Trouble Area |
---|---|---|
B2343 | Sliding roof drive gear sub-assembly (Sliding roof ECU) has not been initialized. | Sliding roof drive gear sub-assembly (Sliding roof ECU) |
WIRING DIAGRAM
Refer to DTC B2341 Click here.
CAUTION / NOTICE / HINT
Note
When DTC B2342 and B2343 are output simultaneously, perform troubleshooting for DTC B2342 first.
When the sliding roof drive gear sub-assembly (sliding roof ECU) is removed and reinstalled or replaced, it requires initialization Click here.
PROCEDURE
INITIALIZE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (SLIDING ROOF ECU)
Check that the sliding roof drive gear sub-assembly (sliding roof ECU) can be initialized Click here.
OK |
---|
Sliding roof drive gear sub-assembly (sliding roof ECU) can be initialized. |
NG |
REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (SLIDING ROOF ECU) Click here |
OK |
CHECK SLIDING ROOF OPERATION
Check the sliding roof auto operation Click here.
OK |
---|
Auto operation operates normally. |
NG |
REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (SLIDING ROOF ECU) Click here |
OK |
CHECK DTC OUTPUT
Clear the DTC Click here.
Recheck for DTCs Click here.
OK |
---|
DTC B2343 is not output. |
OK |
END (PROBLEM DUE TO INITIALIZATION FAILURE) |
NG |
REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (SLIDING ROOF ECU) Click here |