METER / GAUGE SYSTEM
DTC Code | DTC Name |
---|---|
HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
Use the following procedure to troubleshoot the meter / gauge system.
*: Use the GTS.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
Result
Proceed to
NEXT
CUSTOMER PROBLEM ANALYSIS
Result
Proceed to
NEXT
CHECK CAN COMMUNICATION SYSTEM*
Check if CAN communication DTCs are output.
w/ Central Gateway ECU:Click hereClick here
w/o Central Gateway ECU:Click hereClick hereClick here
Result
Result
Proceed to
CAN communication DTCs are not output.
A
CAN communication DTCs are output.
B
B GO TO CAN COMMUNICATION SYSTEM
w/ Central Gateway ECU:Click here
w/o Central Gateway ECU:Click here
CHECK FOR DTC*
Check for DTCs.
Result
Result
Proceed to
DTCs are not output.
A
DTCs are output.
B
PROBLEM SYMPTOM CONFIRMATION
Result
Proceed to
NEXT
SYMPTOM SIMULATION
Result
Proceed to
NEXT
PROBLEM SYMPTOMS TABLE
Refer to Problem Symptoms Table.
Result
Proceed to
NEXT
CIRCUIT INSPECTION
Result
Proceed to
NEXT
REPAIR OR REPLACE
Result
Proceed to
NEXT
CONFIRMATION TEST
Result
Proceed to
NEXT
NEXT END