POWER WINDOW CONTROL SYSTEM UTILITY


  1. CLEAR WINDOW POSITION DATA (Using GTS)

    Note

    If "Reset Memory" is performed, DTC B2313 will be output.


    1. Turn the engine switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the engine switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / D-Door Motor, P-Door Motor, RL-Door Motor or RR-Door Motor / Utility / Reset Memory.

    6. Select the "Reset Memory" to clear the window position data using the GTS.