CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
REMOVE COWL TOP VENTILATOR LOUVER RH
PRECAUTION
Note
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE FRONT BUMPER COVER
REMOVE HEADLIGHT ASSEMBLY LH
Put protective tape around the headlight assembly LH.
Disconnect the connector.
Remove the 3 bolts.
Detach the clip to remove the headlight assembly LH.
*1 | Protective Tape | - | - |