PROCEDURE
PRECAUTION
Note
After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work Click here.
REMOVE LUGGAGE TRIM SERVICE HOLE COVER
DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
REMOVE FRONT DOOR SCUFF PLATE
Tech Tips
Use the same procedure as for the LH side Click here.
REMOVE COWL SIDE TRIM BOARD
Tech Tips
Use the same procedure as for the LH side Click here.
REMOVE FRONT DOOR OPENING TRIM COVER
Tech Tips
Use the same procedure as for the LH side Click here.
REMOVE INSTRUMENT SIDE PANEL
REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
REMOVE INSTRUMENT PANEL BOX DOOR COVER
REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
REMOVE ECU INTEGRATION BOX RH (for LHD)
REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect the 3 connectors.
Remove the 2 screws.
Disengage the 2 guides and remove the air conditioning amplifier assembly.