DESCRIPTION
If the skid control ECU (brake booster with master cylinder assembly) determines that the vehicle is being driven at a steep bank angle, the skid control ECU (brake booster with master cylinder assembly) stores DTC C1440/98 while VSC operation is temporarily disabled.
This is not a malfunction if the system and sensor circuits are normal and if the normal VSC operation resumes.
DTC No. | INF Code | DTC Detection Condition | Trouble Area |
---|---|---|---|
C1440/98 | - | Driving at a steep bank angle. | Yaw rate and acceleration sensor (Airbag sensor assembly) |
PROCEDURE
CHECK DTC
Clear the DTCs (Click here).
Perform a road test.
Check if the same DTC is output (Click here).
Result | ||||||||
---|---|---|---|---|---|---|---|---|
|
END
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS (Click here)
CLEAR DTC
Clear the DTCs (Click here).
If the skid control ECU (brake booster with master cylinder assembly) determines that the vehicle is being driven at a steep bank angle, the skid control ECU (brake booster with master cylinder assembly) stores DTC C1440/98 while VSC operation is temporarily disabled.
This is not a malfunction if the system and sensor circuits are normal and if the normal VSC operation resumes.
END