PROCEDURE
REMOVE FRONT WHEEL RH
REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
Remove the 3 screws and front wheel opening extension pad RH.
REMOVE FRONT FENDER LINER RH
*a | 90° |
Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.
Remove the 4 screws and bolt.
Remove the 6 clips.
Using a 4 mm hexagon wrench, remove the 3 hexagon screws.
Remove the 2 grommets and front fender liner RH.
Tech Tips
The grommets need to be replaced with new ones because they will break when they are removed.
DRAIN WASHER FLUID
Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.
Tech Tips
Use a container to collect the washer fluid.
REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
Disconnect the connector.
Remove the windshield washer motor and pump assembly as shown in the illustration.