CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
REMOVE CONSOLE BOX POCKET
Remove the console box pocket.
REMOVE REAR CONSOLE BOX MOUNTING BRACKET
Remove the 4 bolts and rear console box mounting bracket.
REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Remove the 6 screws and console compartment door sub-assembly.
REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
Using a moulding remover A, detach the 14 claws and remove the inner console door.
Remove the 6 screws and console compartment door hinge sub-assembly.
REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
Remove the 4 screws and console compartment door lock sub-assembly.
REMOVE SWITCH WIRE
Disconnect the connector.
Detach the clamps and remove the switch wire.
REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
Remove the 4 screws and console cup holder box sub-assembly.
REMOVE REFRESHING SEAT SWITCH
for LH Side:
Remove the 2 screws and remove the refreshing seat switch.
for RH Side:
Remove the 2 screws and remove the refreshing seat switch.
REMOVE UPPER NO. 2 CONSOLE PANEL POWER SEAT SWITCH BASE
*a | Protective Tape |
Put protective tape around the upper No. 2 console panel power seat switch base.
*a | Protective Tape |
Remove the 2 screws.
Using a screwdriver, detach the 4 claws and remove the upper No. 2 console panel power seat switch base.
Tech Tips
Tape the screwdriver tip before use.
REMOVE UPPER NO. 1 CONSOLE PANEL POWER SEAT SWITCH BASE
*a | Protective Tape |
Put protective tape around the upper No. 1 console panel power seat switch base.
*a | Protective Tape |
Remove the 2 screws.
Using a screwdriver, detach the 4 claws and remove the upper No. 1 console panel power seat switch base.
Tech Tips
Tape the screwdriver tip before use.
REMOVE REMOTE TOUCH ASSEMBLY
Detach the 6 claws and 2 clips and remove the remote touch assembly.
REMOVE UPPER CONSOLE PANEL
Remove the 12 screws and upper console panel.
REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY
Remove the shifting hole cover sub-assembly.
REMOVE SHIFT POSITION INDICATOR
Remove the 4 screws and shift position indicator.
REMOVE ELECTRIC PARKING BRAKE SWITCH ASSEMBLY
Remove the 2 screws and electric parking brake switch assembly.
REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
Detach the 2 claws and 3 guides and remove the integration control and panel assembly.
REMOVE REAR CONSOLE END PANEL GARNISH
Remove the 6 screws.
Detach the 2 claws and remove the rear console end panel garnish.
REMOVE REMOTE CONTROL ADAPTOR ASSEMBLY (w/ Rear Seat Entertainment System)
REMOVE NO. 2 POWER OUTLET SOCKET ASSEMBLY
REMOVE CENTER POWER OUTLET SOCKET COVER
REMOVE CONSOLE BOX RETAINER
*a | Protective Tape |
Using a screwdriver, detach the claw and remove the console box retainer.
Tech Tips
Tape the screwdriver tip before use.