PROCEDURE
PRECAUTION
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work ( Click here).
REMOVE FRONT FLOOR COVER RH (for Front Floor Cover Type A)
REMOVE CENTER FRONT FLOOR COVER (for Front Floor Cover Type B)
REMOVE FRONT FLOOR COVER RH (for Front Floor Cover Type B)
DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected ( Click here).
REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
REMOVE COMBINATION METER ASSEMBLY
Remove the 2 screws.
Disengage the 2 clips and 2 guides.
Disconnect the 2 connectors to remove the combination meter assembly.