PROCEDURE
REMOVE STEERING COLUMN COVER SUPPORT (w/ Entry and Start System)
REMOVE LOWER STEERING COLUMN COVER
Release the tilt lever, and fully extend and lower the steering column.
Remove the screw from the lower portion of the lower steering column cover.
While turning the steering wheel to the right and left, remove the 2 screws.
Disengage the 3 claws and remove the lower steering column cover.
REMOVE UPPER STEERING COLUMN COVER
Disengage the claw and remove the upper steering column cover.
REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
*1 | Protective Tape |
Disconnect the 2 connectors.
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the windshield wiper switch as shown in the illustration.
Note
If the claw is pushed with excessive force, it may break.