PROCEDURE
DRAIN ENGINE COOLANT
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
REMOVE AIR CLEANER CASE SUB-ASSEMBLY
REMOVE BATTERY
REMOVE BATTERY TRAY
REMOVE BATTERY CARRIER (for LHD)
REMOVE BATTERY CARRIER (for RHD)
REMOVE ENGINE COOLANT TEMPERATURE SENSOR
Disconnect the connector of the engine coolant temperature sensor.
Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor from the cylinder head sub-assembly.
Note
If a component has been dropped or subjected to a strong impact, replace it.
Remove the gasket from the engine coolant temperature sensor.