REMOTE TOUCH DISASSEMBLY

PROCEDURE


  1. REMOVE SWITCH KNOB


    1. A01Q9PCC01
      B002C8N Remove in this Direction

      Remove the switch knob upward as shown in the illustration.

  2. REMOVE COVER


    1. A01QCQ0C01
      B002C8N Remove in this Direction

      Disengage the clips to remove the cover as shown in the illustration.

  3. REMOVE CLEARANCE SONAR SWITCH ASSEMBLY


    1. A01QD6Q

      Disengage the claws to remove the clearance sonar switch assembly.

  4. REMOVE REAR SUNSHADE SWITCH ASSEMBLY


    1. A01QAPR

      Disengage the claws to remove the rear sunshade switch assembly.

  5. REMOVE REMOTE OPERATION BOARD


    1. A01QAPX

      Remove the 4 screws.

    2. A01Q8CX

      Disconnect the connector to remove the remote operation board.

  6. REMOVE INTEGRATION PANEL SUB-ASSEMBLY


    1. A01QBBR

      Remove the 6 screws.

    2. Disengage the claws to remove the integration panel sub-assembly.