PROCEDURE
REMOVE NO. 1 ENGINE UNDER COVER
REMOVE NO. 2 ENGINE UNDER COVER
DRAIN DIFFERENTIAL OIL
REMOVE DIFFERENTIAL MOTOR ACTUATOR ASSEMBLY
Disconnect the breather hose from the differential breather tube bracket.
Remove the bolt and disconnect the differential breather tube bracket.
Disconnect the differential breather hose from the front differential union.
Disconnect the differential oil temperature sensor connector.
Remove the bolt and disconnect the bracket.
Disconnect the differential motor actuator connector.
Remove the bolt and disconnect the bracket.
*1 | Mounting Bolt |
*2 | Mounting Nut |
Support the differential with a jack.
Remove the No. 1 differential mounting nut.
Remove the 2 mounting bolts and 2 nuts.
Lower the jack.
Remove the 4 bolts.
Using a hammer, pry out the differential motor actuator assembly from the differential tube.