PROCEDURE
INSTALL ENGINE OIL TEMPERATURE SENSOR
Install a new gasket to the engine oil temperature sensor.
*a | Torque Wrench Fulcrum Length |
Using a 19 mm union nut wrench, install the engine oil temperature sensor to the stiffening crankcase assembly.
Note
If the engine oil temperature sensor has been struck or dropped, replace it.
Tech Tips
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
When using a 19 mm union nut wrench (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 16.8 N*m (171 kgf*cm, 12 ft.*lbf)
Connect the engine oil temperature sensor connector.
ADD ENGINE OIL
CHECK ENGINE OIL LEVEL
INSPECT FOR ENGINE OIL LEAK
INSTALL NO. 2 ENGINE UNDER COVER (w/ No. 2 Engine Under Cover)
INSTALL FRONT SUSPENSION MEMBER BRACE