FRONT CONSOLE BOX REMOVAL

PROCEDURE


  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01ODFF

      Disengage the claw and disconnect the shift hole cover sub-assembly as shown in the illustration.

    2. A01O9WS

      Turn the shift lever knob sub-assembly counterclockwise and remove it.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. A01OC8AN01

      Using a moulding remover, disengage the 3 clips in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the instrument panel finish panel end LH in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the instrument panel finish panel end LH.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH


    1. A01OBA3N01

      Using a moulding remover, disengage the 3 clips in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the instrument panel finish panel end RH in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the instrument panel finish panel end RH.

  4. REMOVE FRONT PANEL GARNISH LH


    1. A01OB4P

      Remove the 2 screws.

    2. Disengage the 5 clips to remove the front panel garnish LH.

  5. REMOVE FRONT PANEL GARNISH RH


    1. A01ODLN

      Remove the 2 screws.

    2. Disengage the 5 clips to remove the front panel garnish RH.

  6. REMOVE FRONT NO. 1 CONSOLE BOX INSERT


    1. A01ODQ8N01

      Disengage the clip in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the front No. 1 console box insert in the direction indicated by the arrow (2) shown in the illustration to disengage the guide and remove the front No. 1 console box insert.

  7. REMOVE FRONT NO. 2 CONSOLE BOX INSERT


    1. A01OD4LN01

      Disengage the clip in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the front No. 2 console box insert in the direction indicated by the arrow (2) shown in the illustration to disengage the guide and remove the front No. 2 console box insert.

  8. REMOVE CONSOLE PANEL SUB-ASSEMBLY


    1. A01OAXI

      Remove the screw.

    2. Move the shift lever to N.

    3. Disengage the 8 claws, clip and 4 guides as shown in the illustration.

      A01ODBC
    4. Disconnect each connector to remove the console panel sub-assembly.

  9. REMOVE NO. 2 CONSOLE BOX SILENCER PAD


    1. A01ODGE

      Remove the 2 No. 2 console box silencer pads.

  10. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY


    1. A01OAEN

      Disengage the clamp.

    2. Remove the 5 screws and remove the instrument panel cup holder assembly.

  11. REMOVE CONSOLE BOX REGISTER ASSEMBLY


    1. A01OCVL

      Using a moulding remover, disengage the 4 claws, 4 clips and guide and remove the console box register assembly as shown in the illustration.

  12. REMOVE CONSOLE BOX ASSEMBLY


    1. A01OAR3

      Remove the 6 bolts.

    2. A01OCI2

      Pull the rear part of the console box assembly as shown in the illustration to disengage the 2 guides and remove the console box assembly.

    3. Disconnect each connector.